ITW EAE Support Center

How to Replace the Servojet Nozzle

If your nozzle is demonstrating any of these symptoms, you may need to to use the attached procedure to replace the nozzle:


  • The nozzle is clogged and not spraying right.
  • The nozzle is bent and not spraying straight up.
  • The sapphire has been knocked out of the nozzle causing it to spray more flux than the other nozzles.


The servojet fluxer is used on Electrovert wave solder machines Econopak +, Econopak Gold, Vectra ES, Vectra ES 2, Vectra ES 3, Vectra, Vectra 2, Vectra 3, Electra, Electra 3, and Electra 4.



M
MyLinda is the author of this solution article.

Did you find it helpful? Yes No

Send feedback
Sorry we couldn't be helpful. Help us improve this article with your feedback.