The Aquastorm 200 is designed to operate in either Rosin (Chemistry) or O/A (DI Cascade) configurations for Rosin Flux cleaning applications or Organic Acid Flux cleaning applications, by simply opening and closing certain cascade valves. Ensure power is off at the system disconnect and tagged out. Drain system tanks prior to performing the Rosin Cascade Setup or the O/A Cascade Setup procedures to prevent the system from being inadvertently started up while making the necessary changes.
Rosin (Chemistry) Setup
When cleaning using saponifier for Rosin flux applications it is most important to keep chemicals segregated. Open and or close the specified cascade pipe ball valves outlined in this procedure for Rosin cleaning applications. Go to the rear Prewash section and locate the two (2) valves coming from prewash. One (1) goes directly to drain, controlled via a ball valve. The other (2) permits prewash to cascade back to recirculating wash tank, also controlled via a ball valve. Turn the ball valve on the prewash pipe going directly to drain (1) to the CLOSED position to prevent prewash from going directly to drain. Turn the ball valve on the prewash cascade pipe going to the recirculating wash tank (2) to the OPEN position to permit cascading to occur.
O/A (DI) Cascade Setup
When cleaning using Organic Acid (O/A) applications it is most important to permit cascading to occur. Open andor close the specified cascade pipe ball valves outlined in this procedure for O/A cleaning applications. Go to the rear Prewash section and locate the two (2) valves coming from prewash. One (1) goes directly to drain, controlled via a ball valve. The other (2) permits prewash to cascade back to recirculating wash tank, also controlled via a ball valve. Turn the ball valve on the prewash pipe going directly to drain (1) to the OPEN position to allow prewash to go directly to drain. Turn the ball valve on the prewash cascade pipe going to the recirculating wash tank (2) to the CLOSED prevent cascading from occurring.
Next: Go to the rear recirculating rinse section and locate the cascade pipe going from the recirculating rinse tank to the recirculating wash tank.
Rosin (Chemistry) Setup
When cleaning using saponifier for Rosin flux applications it is most important to keep chemicals segregated. Turn the ball valve located on this cascade pipe to the CLOSED position (As shown). This prevents cascading from occurring, keeping saponifier solutions separate.
O/A (DI) Cascade Setup
When cleaning using Organic Acid (O/A) applications it is most important to permit cascading to occur. Turn the ball valve located on this cascade pipe to the OPEN position (Handle should be in-line with plumbing). This permits cascading to occur.
Note: Failure to follow recommended valve settings could result in process issues such as high chemistry consumption, tank temperature fluctuations and foaming.