ITW EAE Support Center

Chosing a Plenum






Rapid Prime prepares the wiper solvent by priming the line, pre-wetting the paper, and tightening the paper during the print stroke (if the first wipe of a wipe sequence is a solvent wipe). Pre-wetting the wiper paper reduces the cleaning cycle time by six to eight seconds (on average), reducing the time required to wait for the system to pre-wet the paper prior to the solvent stroke. This aids in decreasing cycle time while increasing throughpu

Amos is the author of this solution article.

Did you find it helpful? Yes No

Send feedback
Sorry we couldn't be helpful. Help us improve this article with your feedback.