ITW EAE Support Center

Protocol3 Reset to Default

See attached instructions for resetting the Protocol3 control back to the factory default settings.

Note:  The default settings may not be the settings for your oven as they are the settings from West, not the settings that shipped with the oven.

Default settings are for an oven with a 260 deg C max temp. and relay outputs 1 through 4 unused, and relay 5 set for end of cycle.

D
Dan is the author of this solution article.

Did you find it helpful? Yes No

Send feedback
Sorry we couldn't be helpful. Help us improve this article with your feedback.