ITW EAE Support Center

Configuring the Machine Type on the XPM1 and XPM2

Due to power issues or re-installing software, the machine software might not have a Machine Type on the top left corner of the  screen.  An example of what you should see for an XPM2 1030 air machine is :

Your machine should be similar to this.  If it says Non System Type or only Vitronics at the top, you will need to perform the attached procedure to set up the software for the correct type of machine.

Jeff is the author of this solution article.

Did you find it helpful? Yes No

Send feedback
Sorry we couldn't be helpful. Help us improve this article with your feedback.